Date	Time	Initial	Final	Bias	Period	Step_Size	Averaging_points	Gate_range	SD_range	Chip_name	Device_name	Pins_G-S-D	Run_number
20100709	15:39	-1.000	1.000	0.010	0	0.020	1	2nA	200nA	W14Chip2	W14Chip2N2D3	28-1-2	1
20100709	15:40	-1.000	1.000	0.010	300	0.020	1	2nA	200nA	W14Chip2	W14Chip2N2D3	28-1-2	1
20100709	15:45	-0.100	0.100	0.000	300	0.005	1	2nA	2nA	W14Chip2	W14Chip2N2D3	28-1-2	2
20100709	15:46	-0.010	0.010	0.000	300	0.001	1	2nA	2nA	W14Chip2	W14Chip2N2D3	28-1-2	3
20100709	15:48	-0.100	0.100	0.000	300	0.001	1	200nA	2nA	W14Chip2	W14Chip2N2D3	28-1-2	4
20100709	15:52	-0.030	0.030	0.000	300	0.001	1	200nA	2nA	W14Chip2	W14Chip2N2D2	-27-26	1
20100709	15:52	-0.030	0.030	0.000	300	0.001	1	200nA	2nA	W14Chip2	W14Chip2N2D2	-27-26	1
20100709	15:53	-0.100	0.100	0.000	300	0.005	1	200nA	2nA	W14Chip2	W14Chip2N2D2	-27-26	2
20100709	15:56	-0.030	0.030	0.000	300	0.005	1	200nA	2nA	W14Chip2	W14Chip2N2D2	-27-26	3
20100709	15:56	-0.030	0.030	0.000	300	0.001	1	200nA	2nA	W14Chip2	W14Chip2N2D2	-27-26	4
20100709	15:57	-0.030	0.030	0.000	300	0.001	1	200nA	2nA	W14Chip2	W14Chip2N2D2	-27-26	5
20100709	15:59	-0.030	0.030	0.000	300	0.001	1	200nA	2nA	W14Chip2	W14Chip2N2D3	-1-2	5
20100709	15:59	-0.030	0.030	0.000	300	0.001	1	200nA	2nA	W14Chip2	W14Chip2N2D3	-1-2	6


Notes
-----

Pin 28 was the gate. 1 and 2 are the source and drain on the previously-gate-working device (the main device). Resistance is about 6 MΩ.

26 and 27 are the source and drain on the other device (the control device). Resistance about 6.2MΩ. Run W14Chip2N2D2-2 was quite non-linear.

This scan showed both devices were ok (gate dead though), with larger resistance than previously.

During the last run (and a couple of others) I was flicking the desk light on and off. The graph went down when the light was turned on (increased (negative) current) and back up when it was turned off.